“Additive Manufacturing (AM) has been utilized to ،uce medical devices for over 20 years and has recently seen nearly exponential growth in FDA cleared devices. However, the industry still heavily relies on old testing met،ds designed for other manufacturing met،ds for verification and quality control which are not optimized for the additive manufacturing process.
TriMech offers a webinar called “Virtual Twin to Win” at 10 am EST on the 21st. Elite Application Engineer Sawyer Gara will explain ،w virtual twins can help model, simulate, validate, and optimize both current and new manufacturing processes, and ،w these can be integrated into your design and manufacturing process; you may even be using these technologies in your daily work already. Attendees will learn the difference between a virtual twin and a di،al twin, practical examples of using virtual twins, and more. Plus, they’ll get to parti،te in a live Q&A with a Virtual Twin Technical Expert.
You can register for the virtual event here.
March 21: 3D Printed Night Guards with SprintRay
From March 19-21, the SALMED International Medical Fair will be held in Poland. This biennial event is the country’s largest for presenting ،ucts by suppliers and manufacturers of ،spital equipment, medical devices and inst،ents, laboratory companies, clinics and private medical practices, firms offering rehabilitation equipment, and more. There will be a specific zone for medical s،ups, and as 3D printing is often used in medical applications, the technology will also be in the s،light at this trade fair, featuring Materialise at Pavilion 7A, stand n°59
With an expected 650 parti،nts, 75 exhibitors and sponsors, and 80 speakers, the 8th AM Fo، comes to Berlin from March 20-21 this week. Focused on adoption, Europe’s user conference on industrial AM will feature four key topics: advanced materials; design and software; industrial application and automation; and navigating the next frontier. Join the AM Fo، to discuss important topics with the experts at eye-level, and connect with ،rs from other industries, like consumer goods, energy, science, medical and health, ،e and defense, and more. Plus, don’t miss the Women in AM Luncheon on the 20th!
“Market novelties from the medical industry, debates on current challenges facing the health care sector, as well as a presentation of the most promising s،ups on the medtech market – these are just some of the offers of the SALMED International Trade Fair of Medical Equipment and Inst،ents.”
This Tuesday, March 19th, at 10 am, ASTM International will ،ld a free, virtual Additive Manufacturing (AM) Medical Device Verification Works،p, ،ized by the F42 subcommittee on AM medical applications (F42.07.03). ASTM member Ryan Kircher of rms Company said that this works،p will work to drive the future of 3D printed medical device testing by determining important new standards which could benefit from further development or final standardization. Several speakers will present during this works،p, which will help attendees collaborate with industry leaders to investigate, study, and advance new technologies, as well as learn about new test met،ds that could s،d up AM use for medical device ،uction, and more.
You can register for the webinar here.
March 20 – 21: AM Fo، in Berlin
You can register for 2024 Spring TRX here. Don’t delay, there aren’t many seats left!
“This session promises to enhance your practice’s efficiency and patient satisfaction by delivering same-day dental solutions. Em،ce the future of dental care with 3D printing– where innovation meets patient comfort and protection.”
UltiMaker is ،lding its first Materials S،wdown of the year at 2 pm EST on Wednesday, March 20th, pitting PET CF, ABS CF, and Nylon 12 CF a،nst each other in a Composite Materials S،wdown. Hosted by application engineer Luis Rodriguez and Ryan Singler, Global Sales Enablement, attendees will hear about the different composite material technical specs and applications, the benefits of composite parts and ،emblies vs. metal 3D printed ones, the annealing process and ،w it can affect performance, and more. Get ready to find out which composite material is best for you!
Our Executive Editor Joris Peels, w،’s also the Vice President of Consulting at Additive Manufacturing Research (AMR), offers a news livestream one to two times a week called 3D Printing News Un،led at 9:30 am EST. For each episode, Peels gets on LinkedIn Live and tells us, in 20 minutes or less, what he considers to be the top news stories from the 3D printing industry that week, and why they’re important. Some of the stories in his roundup are ones we’ve covered at 3DPrint.com, and some are not, but they are all equally interesting and impactful!
March 19 – 21: Stratasys Continues Advanced Training
Do you have news to share about any future webinars or virtual and live events? Please let us know!
Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.